Features
■ It is safe and reliable and the gas pipe has good flexibility. It can be bent arbitrarily under the minimum bending radius requirement. The bending section of the gas pipe does not need home improvement elbows and it has fewer connection points than galvanized pipes;
■ The flame-retardant sheath with the function of covering and guiding the gas non-fixed-length pipe is not only flame-retardant. When the pipe body is accidentally damaged the leaked gas will be removed from the detection port of the quick connector along the gas guide groove of the sheath so as to achieve high efficiency and rapid reduction. Drain the source of leakage;
■ When a large vibration is caused the gas pipeline will be greatly twisted or displaced. It has better absorption and compensation of displacement effectively avoiding the above-mentioned hidden dangers of accidents;
■ Long service life The material is made of 304 stainless steel covered with flame-retardant casing and the service life can reach 30 years replacing the traditional galvanized pipe;
■ Convenient installation The stainless steel bellows for gas transportation can be cut at will and the installation is simple with matching professional joints and easy installation;
■ Beautiful: The gas pipe can be buried in the wall or mounted on the surface which is more beautiful than the traditional galvanized pipe;
■ Application range Medium: natural gas artificial gas liquefied petroleum gas biogas etc.
High-density flexible tube section designed for the user to wear em| Model | International code | specification |
|
ZR10AR |
RSB-1F-10GB/T 26002 |
10A |
|
ZR13AR |
RSB-1F-13GB/T 26002 |
13A |
|
ZRQ10AR |
RSB-1F-10GB/T 26002 |
10A |
|
ZRQ13AR |
RSB-1F-13GB/T 26002 |
13A |
|
ZRQ15AR |
RSB-1F-15GB/T 26002 |
15A |
|
ZRQ20AR |
RSB-1F-20GB/T 26002 |
20A |
|
ZRQ25AR |
RSB-1F-25GB/T 26002 |
25A |
|
ZRQ32AR |
RSB-1F-25GB/T 26002 |
32A |
Construction Notes
■ The pipe fittings must be installed by professionals
■ Special tools are required for pipe cutting and stripping
■ The corrugated pipe buried in the wall must use a protective cover and a protective plate must be used in the part that may be nailed
■ Quick connector can not be buried in the wall
■ Laying in the living room the gas pipe in the aisle should not have joints
■ Corrugated pipes should not intersect with various me
■ If the partition surface is flat or concave it needs to be re-cut before connecting
■ The bellows cannot be forcibly twisted and must be greater than the minimum bending radius when bending
■ The connection between the end of the bellows and the joint and between the end of the protective sleeve and the bellows should be sealed with tape or other materials to prevent water or foreign ob
■ Quick coupling can be used multiple times but the gasket can not be used again
■ When passing through the bathroom or attic the bellows should not have joints and should be set in the steel casing
■ The landfill la
Prohibited matters
1. Excessive bending twisting trampling strong pulling and strong hitting are strictly prohibited
2. When passing through the bathroom or the attic the gas bellows should not have joints and should be set in the steel casing
